A Guide to ASTM E3024 Standard Practice for Magnetic Particle for General Industry


Posted By: Steve Published: 09/22/2020 Times Read: 198


Magnetic particle users outside the aerospace industry have typically used ASTM E709 Standard Guide for Magnetic Particle Testing as their baseline standard for procedures. ASME, AWS, and API standards all use ASTM E709 as a reference to build their specific requirements.

However, from an ASTM perspective, E709 is officially a “Guide,” which ASTM defines as, “a compendium of information or series of options that does not recommend a specific course of action. A guide increases the awareness of information and approaches in a given subject area.” This means it provides information and recommendations, but it does not actually include any hard requirements.

That’s why there are also Standard Practices like ASTM E1444 Standard Practice for Magnetic Particle Testing. According to ASTM, a Practice is, “a definitive set of instructions for performing one or more specific operations or functions that does not produce a test result. Examples of practices include, but are not limited to: application, assessment, cleaning, collection, decontamination, inspection, installation, preparation, sampling, screening and training.”

The problem many NDT pros run into when trying to use ASTM E1444 is that it includes a lot of aerospace-specific practices which aren’t appropriate for other industries.

To resolve this technical issue, the ASTM committee formed a task group in 2014 to draft a new standard practice that includes hard requirements, but is geared towards more industrial applications.

After two years of work, the result was a new standard – ASTM E3024 Standard Practice for Magnetic Particle for General Industry

With ASTM E3024, aerospace-specific requirements are not imposed on industrial applications like billet, tube, powdered metal, pipeline, tank or welding inspections. But at the same time, calibration and equipment reliability checks are improved and standardized.

Looking forward, industry standards such as ASME, AWS, and API will be updated to reference this new document. And as a result, we will have consistent magnetic particle inspections across all industries, which will simplify the training required for users and inspectors.

With the publication of ASTM E3024, work is underway in the ASTM committee to update E1444 as well.

The opportunity to make ASTM E1444 an aerospace-only document promises to greatly simplify this practice, since requirements for dry powders and visible inspection will be removed or referenced to ASTM E3024. Of course, changes to E1444 will take time to make sure the details are correct and all the changes are appropriate; but we can all look forward to a simplified E1444 in the future.


For questions regarding products that adhere to these specifications feel free to reach out to us at [email protected] or 800-221-1116.


Source:

Geis, David. "A Guide to ASTM E3024 Standard Practice for Magnetic Particle for General Industry" Magnaflux Blog, 3 April 2018, https://www.magnaflux.com/Magnaflux/Blog/ASTM-E3020-Standard-Practice

Tags: non-destructive testing (ndt), magnaflux, magnetic particle inspection (mpi), astm, e3024, specifcations,

Products related to this post

14A

Starting at $189.00

Y-2

$700.00

#1 Gray

Starting at $126.00

Related Posts

How to Use QQIs & Magnetic Flux Indicators

How to Use QQIs & Magnetic Flux Indicators

Magnetic Particle Inspection Flux Indicator Strips and Quantitative Quality Indicators (QQI) are defined and given a user manual approach to find artificial flaw standards..

Author: Steve Added: 08/22/2019 views: 1071

Read more