CD-Series Electromagnetic Current Generators
- Brand: Magnaflux
- Product Code: CD-2100
- Availability: Quote - This item is available for quotation only.
Magnaflux Power Pack Electromagnetic Current Generators with 3-Phase FWDC Magnetization
The CD-Series is Magnaflux's line of magnetic power packs for magnetic particle inspection. These stationary magnetizing current generators are power pack versions of our wet bench units to effectively magnetize parts while keeping power requirements to a minimum. CD-Series units are ideal for large parts which will not fit easily on a wet bench or for parts that require special handling. CD-Series power packs are available in two configurations: CD-2100 and CD-2100HV.
Benefits
- Most economical way to create a high magnetizing current with minimal power requirements
- For parts too large for traditional wet horizontal units or parts that need special handling
Features
Exterior:
- Current Assurance Indicator
- Large, easy to read Digital Ammeter Display
- Sturdy Flat top, use as a convenient work surface
- Ergonomic Display and Control Panel
- Remote Mag Receptacle (Use with ZB-100FMB)
- Dual 115 volt Accessory Outlets
Interior:
- PLC control advanced technology; reduce components and increase reliability
- Modular digital solid state circuitry
- Quick Break Circuitry
- Liquid Resistant panels, allow ventilation while inhibiting fluid intrusion
CD-2100 | CD-2100HV |
10,000 amp, 3-phase rectified to FWDC output | 10,000 amp, 3-phase FWDC output |
Duty cycle 0.5 seconds on, 20 seconds off (2.5% w/ 5 second max) | Duty cycle 0.5 seconds on, 10 seconds off (5% w/ 5 second max) |
Ultra low frequency reversing DC demagnetization | Ultra low frequency reversing DC demagnetization |
Available voltages: 230, 380, 415, 460, or 575 w/ 50 or 60 hertz, three phase power | Available voltages: 230, 380, 415, 460, or 575 w/ 50 or 60 hertz, three phase power |
Minimum 80 PSI w/ 5 SCFM capability | Minimum 80 PSI w/ 5 SCFM capability |
60 x 31 in (153 x 79 cm) foot print, allow 24 in (61 cm) per side for ventilation | 60 x 31 in (153 x 79 cm) foot print, allow 24 in (61 cm) per side for ventilation |
Pulsed output (0.5 sec on - 1 sec off for 10 cycles) | Pulsed output (0.5 sec on - 1 sec off for 10 cycles) |
NRTL Certification to CSA C22.2 No. 61010-1 (optional) | NRTL Certification to CSA C22.2 No. 61010-1 (optional) |